Setting up Tera Term for BTS Trace

Open Tera Term
make sure the TCP/IP radio button is selected
put the IP address of the pbx in the box
click in the Telnet radio button
put the port 33321 in the TCP port box
Leave everything else.
click OK

You should now get the black box up

Go to Setup at top of page
Click Terminal
Just to the right hand side, change the New-line Receive and Transmit to CR+LF (choose from the dropdown boxes for both)
Then put a tick in the Local Echo box
Leave everything else.

Click OK

Hit return until you see a - on screen
Type login
return
Now you should see Enter password on the screen
Enter your pbx password
Return

Now you should get the MPR00> prompt on screen.

Now follow the BTS guide.